Notice: Function _load_textdomain_just_in_time was called incorrectly. Translation loading for the the-events-calendar domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /home/storm/sites/dev-imca-int-com-1/public/wp-includes/functions.php on line 6114

Notice: Function _load_textdomain_just_in_time was called incorrectly. Translation loading for the broken-link-checker domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /home/storm/sites/dev-imca-int-com-1/public/wp-includes/functions.php on line 6114

Notice: Function _load_textdomain_just_in_time was called incorrectly. Translation loading for the woocommerce-eu-vat-number domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /home/storm/sites/dev-imca-int-com-1/public/wp-includes/functions.php on line 6114
Worker hit by steel plate falling from crane - DEV imca
Skip to content

Worker hit by steel plate falling from crane

What happened?

The UK Health & Safety Executive (UK HSE) reports that a company has been fined after an employee was injured when he was struck by a steel plate that fell from a crane.

What went wrong? What were the causes?

A person was carrying out work on a new metal staircase which was under construction. The task involved using a crane to lift a steel sheet attached to a magnet, but the sheet became detached from the magnet and fell, striking the injured person on the back and causing severe back injuries. The worker fractured his spine and has been unable to continue working as a steel fixer.

The UK HSE investigation found that the company had failed to ensure that the lifting equipment was of adequate strength and stability for each load. Whilst the safe working load was 1000kg, the magnet had to be de-rated to take into account the thinness and the length of the metal being lifted. The company also failed to ensure that the lifting operation was planned by a competent person, appropriately supervised and carried out in a safe manner.

The full press release can be found on the HSE website.

Members may also wish to refer to the following incident:

Safety Event

Published: 24 April 2018
Download: IMCA SF 09/18

Relevant life-saving rules:
IMCA Safety Flashes
Submit a Report

IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of all. The effectiveness of the IMCA Safety Flash system depends on Members sharing information and so avoiding repeat incidents. Please consider adding safetyreports@imca-int.com to your internal distribution list for safety alerts or manually submitting information on incidents you consider may be relevant. All information is anonymised or sanitised, as appropriate.

IMCA’s store terms and conditions (https://www.imca-int.com/legal-notices/terms/) apply to all downloads from IMCA’s website, including this document.

IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.