A member reports two incidences of unsafe lifting, which are worthy of note. Incident 1 Unsafe Lifting Operations By sub-contractor On a platform supply vessel (PSV) involved in demobilization operations […]
the-events-calendar
domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init
action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /home/storm/sites/dev-imca-int-com-1/public/wp-includes/functions.php on line 6114broken-link-checker
domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init
action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /home/storm/sites/dev-imca-int-com-1/public/wp-includes/functions.php on line 6114woocommerce-eu-vat-number
domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init
action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /home/storm/sites/dev-imca-int-com-1/public/wp-includes/functions.php on line 6114IMCA safety flashes disseminate important information on incidents and potential hazards and the lessons learnt from them that can help prevent incidents occurring elsewhere in the industry.
Individual safety events are available individually online, tagged and searchable, while the traditional PDF collections are also available for download.
All members are encouraged to contribute relevant safety-related information – please visit our Safety Flash Reporting page for details on the submission process.
Nicholas Hough
Technical Adviser - HSSE and Offshore Survey
Contact
A member reports two incidences of unsafe lifting, which are worthy of note. Incident 1 Unsafe Lifting Operations By sub-contractor On a platform supply vessel (PSV) involved in demobilization operations […]
What happened? A lightning conductor mounted on top of a service crane came free from its mounting and dropped 75 meters. The conductor fell through the deck carousel hatch and […]
What happened? During trans-spooling of 1½” hydraulic jumper from a wooden reel to a subsea carousel, the second end termination head of the hydraulic jumper pipe released from the reel […]
What happened? This was a high potential near miss dropped object incident in which a crane boom bumper stop fell onto the crane cab. No personnel were injured; however, there […]
What happened? During lifting up and securing of a vessel’s retractable gangway, the spring latch of the lifting device disconnected causing an uncontrolled release of the holding wire, and the […]
What happened? During a mechanical lifting operation using a mobile crane, the crane was required to move and set up at a new location. The crane outrigger stabiliser pads (1.2T […]
What happened? During crane operations on an offshore vessel, quantities of grease fell from the crane block and landed on deck. The incident occurred in daylight, when a wellhead head […]
What happened? The Marine Safety Forum (MSF) has published Safety Alert 19-08 relating to two dropped object incidents on the same vessel. Both events had the potential to cause major […]
What happened? During subsea lifting operations with divers in the water, a large mattress lifting beam was lowered inappropriately close to the divers. The two saturation divers were deployed on […]
What happened? During routine lifting activities, a vessel crane’s (auxiliary) anti-two block (A2B) suspension wires failed, causing the A2B weight assembly to fall along the crane wire to the crane […]
What happened? A member notes an incident during lifting operations, resulting in dropped flexible pipe. A 6tonne riser test piece (RTP) was being lifted in preparation for load testing the […]
What happened? During a routine lifting operation, a pallet laden with about 1 tonne of bottled water, slid off the pallet lifting forks and fell around 8 metres to the […]
What happened? A storage box weighing approximately 770kg fell 4m from the forks of a forklift truck. The incident occurred when storage boxes containing items of equipment located on an […]
What happened? A rigger was struck by a lever hoist hook, which led to a restricted work case. The incident occurred during lifting operations and had the potential to have […]
The Marine Safety Forum (MSF) has published Safety Alert 18-26, in which an AB was struck on the head by a crane hook during routine deck cargo transfer operations. A […]
What happened? During drilling operations on a land-based drilling rig, the thimble within the hard eye of the winch wire momentarily caught (snagged) on the edge of the drill rig […]
What happened? The Norwegian Petroleum Safety Authority (PSA) has completed its investigation of the fatal accident on 7 December 2017 on Maersk Interceptor, a jack-up facility, in which one person […]
What happened? Project related equipment was returned to a yard in a half-height container. The equipment came from a project-chartered vessel which had been demobilised at a nearby port. As […]
What happened? A crewman was hit by a steel plate bouncing off the deck after it fell 14m from a load after a magnet failed. The incident occurred when shaped […]
What happened? A rigger walking along the quayside tripped over an obstacle, and in the resulting fall suffered fractures to both wrists, a bone in his hand and his elbow. […]
61 post(s)