What happened? A dropped object event occurred when a crane wireless remote control unit fell from the main deck to the ROV winch room deck below. An operator was controlling […]
the-events-calendar
domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init
action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /home/storm/sites/dev-imca-int-com-1/public/wp-includes/functions.php on line 6114broken-link-checker
domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init
action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /home/storm/sites/dev-imca-int-com-1/public/wp-includes/functions.php on line 6114woocommerce-eu-vat-number
domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init
action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /home/storm/sites/dev-imca-int-com-1/public/wp-includes/functions.php on line 6114IMCA safety flashes disseminate important information on incidents and potential hazards and the lessons learnt from them that can help prevent incidents occurring elsewhere in the industry.
Individual safety events are available individually online, tagged and searchable, while the traditional PDF collections are also available for download.
All members are encouraged to contribute relevant safety-related information – please visit our Safety Flash Reporting page for details on the submission process.
Nicholas Hough
Technical Adviser - HSSE and Offshore Survey
Contact
What happened? A dropped object event occurred when a crane wireless remote control unit fell from the main deck to the ROV winch room deck below. An operator was controlling […]
What happened? Able seamen were assisting with overboarding an ROV hook (connected to the lower drum tow wire) over the stern of the vessel until it could run freely on […]
A member reports two incidences of unsafe lifting, which are worthy of note. Incident 1 Unsafe Lifting Operations By sub-contractor On a platform supply vessel (PSV) involved in demobilization operations […]
What happened? A load shifted during cargo operations, pinning a crewman’s leg between the deck and the load, causing a broken leg. The incident occurred on a vessel which was […]
What happened? A worker was injured whilst cleaning equipment using a portable handheld angle grinder fitted with a wire brush. The rotating brush caught an edge and kicked into the […]
What happened? An umbilical winch sheave was being hand-rolled along the deck when it fell over and struck the leg of one of the people handling it. Crew were rolling […]
What happened? While running in drill pipe on a drilling vessel, part of a guide sheave failed and fell approximately 15m to the drill floor. A ‘Red Zone’ was in […]
What happened? During vessel mobilization the boat cradle had to be shifted from centre of the main deck towards the starboard side closer to the accommodation. The Main Crane was […]
What happened? Whilst preparing a crane for operations, the additional man riding calliper brake casing cover on the primary winch failed, causing the brake pad, rings and cover to fall […]
What happened? Grinding machine was observed as used with damaged grinding disc. Broken disc projectile could potentially cause serious injuries. Many other workers have been injured when angle grinders have […]
What happened? In a shore-based workshop facility, the filters inside a welding fume extraction unit ignited whilst in operation. On investigating an initial smell of burning, smoke was seen escaping […]
What happened? While crew were moving lashing materials (chains, shackles and turnbuckles) from the garage deck into a storage space, the bosun suffered a serious finger injury. The incident occurred […]
What happened? Whilst using a hydraulic sample extruder in a laboratory, the technician caught and injured his finger between the Shelby tube and extruder ram while trying to stabilise the […]
What happened? An incorrectly secured console cover closed in an unplanned and unexpected way, trapping a crew member’s finger, which was injured. After completing a task on a raised working […]
What happened? The UK Marine Accident Investigation Branch (MAIB) has published Accident Investigation Report 09/2020 into the death of the Master of dredging vessel Cherry Sand when he was crushed […]
What happened? During preparations for disconnecting a tow tug which was moored to a barge in turn moored to the jetty, a crew member of the tow tug fell into […]
What happened? Marine Safety Forum Safety Alert 20-04 describes a potential dropped object (PDO) during cargo operations. A wooden baton of the type often used to support covers attached to […]
What happened? An AB got his leg entangled with a tag line during lifting operations. The incident occurred when a vessel was alongside a rig offloading cargo. The AB attached […]
What happened? The UK Marine Accident Investigation Branch (MAIB) has published Accident Investigation Report 10/2020 into the death of the Third Officer of Seatruck Progress, when he was struck and […]
What happened? Whilst engaged in business travel, an employee of one of our members slipped and fell when descending a hotel staircase. He sustained multiple fractures and dislocation of the […]
178 post(s)