What happened A winch wire failed causing a pennant assembly and wire to fall directly into a crane basket. There were no injuries. The incident occurred whilst operating a forward […]
Safety Flashes
IMCA safety flashes disseminate important information on incidents and potential hazards and the lessons learnt from them that can help prevent incidents occurring elsewhere in the industry.
Individual safety events are available individually online, tagged and searchable, while the traditional PDF collections are also available for download.
Submit a Report
All members are encouraged to contribute relevant safety-related information – please visit our Safety Flash Reporting page for details on the submission process.
IMCA Contact
Nicholas Hough
Technical Adviser - HSSE and Offshore Survey
Contact
Safety Events
A structural failure leads to uncontrolled motion of a ‘Billy Pugh’ basket and injuries to crew
What happened The United States Bureau of Safety & Environmental Enforcement (BSEE) has issued a bulletin about an incident in which a ‘Billy Pugh’ basket was subject to uncontrolled motion […]
UK HSE: Worker loses fingers in crush injury during lifting operations
What happened The UK HSE reports that a company has been sentenced after a worker lost his middle two fingers at work. The incident occurred whilst he was trying to […]
Stored energy near miss: Person nearly hit by equipment caught during light daughtercraft operations
What happened A stand-by diver on a light daughtercraft (LDC) was nearly hit by a flying block and tackle, which was thrown towards him by an unplanned release of tension […]
Pin from crane block sheave guard fell 25m
What happened A member of UK Step Change in Safety reports an incident in which a main block sheave guard came loose from the main crane block and fell approximately […]
High potential dropped object near miss: Object fell from cargo
What happened The Marine Safety Forum (MSF) reports an incident in which a piece of grating weighing 17kg fell from a load. It fell 6-7m to deck. Crew were on […]
Fatality: Crew member crushed between TMS and snubber ring
What happened During a maintenance operation, a member of an ROV crew sustained fatal injuries when he was trapped between the top of the tether management system (TMS) and the […]
Near miss – grating dislodged and fell, leading to crewman slipping
What happened? During flow-line installation work on an oil platform, a section of plastic grating became dislodged as a crewman stepped on it. The incident occurred when crew were making […]
Crewman got cement dust in his eyes
What happened? During the discharging of a cement tank on board a vessel, a crewman was standing in the path of a blow back of cement dust, and the dust […]
Lost time injury (LTI) – finger laceration due to use of knife
What happened? A crew member was working with a knife when his knife suddenly slipped and sliced a layer of skin off his index finger and part of the nail […]
Property damage: platform supply vessel collided with legs of jack-up rig
What happened? A Platform Supply Vessel (PSV) collided with the legs of a jack-up drilling rig, causing some damage to the PSV. The incident occurred after transfer of water to […]
Worker crushed by dropped/falling object
What happened? A load from the top of a double-decked trailer fell onto a worker, causing life-changing injuries. His employer was prosecuted by the UK HSE and fined. See press […]
Worker was injured by a fork lift truck
What happened? A worker wasstruck by a reversing fork lift truck which resulted in him fracturing his pelvis. His employer was prosecuted by the UK Health & Safety Executive (UK […]
Passenger safety in retrofitted mini-vans/buses
What happened? An International Association of Oil & Gas Producers (IOGP) member reports on an audit into the use of retrofitted vehicles, e.g. converted cargo-duty mini-vans/buses for passenger transportation. Inspections […]
Fatality during unpacking of heavy electrical panel equipment
What happened? Step Change UK report a fatal incident which occurred during the unpacking of heavy electrical equipment on an offshore production platform. A Variable Speed Drive electrical panel, weighing […]
High potential near miss: slip on tag line during crane operations
What happened? The Marine Safety Forum (MSF) reports an incident in which a crewman slipped and fell during lifting operations. The incident occurred when a vessel was preparing for cargo […]
Bunkering hose dropped to deck – incorrect lifting procedure
What happened? A bunkering hose was dropped to deck from 11m in the air. A vessel had just completed cargo operations with a supply vessel. The operation had included the […]
High potential near miss: dropped object – buffer plate fell from crane boom
What happened? During lifting operations with the main crane, a buffer plate fell from the crane boom. It fell approximately 10m, weighing 70 kg and was 90cm x 40cm. It […]
Dropped object near miss – hammer dropped from scaffolding
What happened? A hammer weighing 1.1kg was inadvertently dropped from height and fell over 12m to the deck. Third party scaffolders were erecting scaffolding along the funnel of a vessel. […]
LTI: Crush injury to middle and index finger
What happened Riggers on a vessel were moving heavy deck plates (2.45 m x 1.2 m x 5 mm, weighing 114 kg) when one of them got his hand caught, causing a crush […]
178 post(s)