Worker killed when struck by a load on a moving crane
The UK Health & Safety Executive (HSE) has published the following information regarding an incident where a worker was killed when he was struck on the head by a load on a moving crane. The incident occurred in a foundry when the worker was helping move a crucible from a re-melt furnace. The crucible had been lifted using an overhead crane and moved approximately 10m to where the worker loosened the bolts around the crucible. The crane operator waited for acknowledgment to proceed and lifted the load around 60cm higher before continuing movement. The crane operator saw the worker in the path of the load and shouted a warning while stopping the movement of the crane. The crane stopped but the load swung forward hitting the person on the right side of the head, causing fatal injuries.
An investigation revealed the following:
- The company had held no review of risk assessments and safe systems of work for a number of years;
- Crane operators had received no refresher training for years;
- Training for new employees was not adequate.
Further information can be found at press.hse.gov.uk/2015/metal-firm-fined-after-worker-was-killed-by-a-crane/?ebul=hsegen&cr=5/30-nov-15
Members may wish to review the following incident (search words: struck, crane):
Safety Event
Published: 15 January 2016
Download: 
IMCA SF 02/16
IMCA Safety Flashes
Submit a Report
IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of all. The effectiveness of the IMCA Safety Flash system depends on Members sharing information and so avoiding repeat incidents. Please consider adding [email protected] to your internal distribution list for safety alerts or manually submitting information on incidents you consider may be relevant. All information is anonymised or sanitised, as appropriate.
IMCA’s store terms and conditions (https://www.imca-int.com/legal-notices/terms/) apply to all downloads from IMCA’s website, including this document.
IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.