Unsecured object fell and injured crewman
During ‘routine’ offshore operations, a piece of unsecured grillage stowed on deck toppled and struck a member of the deck crew on the foot. The impact was severe and caused multiple fractures to the metatarsal bones of his foot and serious lacerations. The injured crew member was medivaced to a local hospital where he is currently being treated.
At the time of the incident the weather was flat calm and the vessel was in transit. The deck crew was involved in setting up a rigging arrangement on the over-boarding chute whilst technicians were carrying out fault-finding on other equipment. Four members of the deck crew were on their way to collect rigging equipment from the rigging container. To reach the container the crew had to pass between a deck tugger winch and a heavy piece of grating which had been removed from the top of the equipment being investigated by the technicians. This piece of grating was stowed upright against the plough guards on deck.
Whilst passing between the tugger and the plough guard the grating was disturbed and fell, striking the foot of the injured party. The grating was fitted with fixing lugs, one of which severely impacted the foot, penetrating the safety boot and caused the injuries.
This incident occurred during ‘routine’ deck activities when the level of hazard awareness and attention to detail was perhaps not as high as it would be when the vessel was fully operational on project construction work. This highlights the need for the same level of awareness, attention to detail and communications during ‘routine’ work as there is during project construction operations.
The following points were noted:
- The grating was an obvious obstruction and partly blocked a frequently used access route to storage and working areas;
- It was left completely unsecured and incorrectly stowed;
- Three people attempted to walk round the obstruction without identifying the potential hazard – the fourth became the injured party;
- An obvious hazard went unchecked and subsequently caused an accident.
Safety Event
Published: 9 June 2008
Download: IMCA SF 10/08
IMCA Safety Flashes
Submit a Report
IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of all. The effectiveness of the IMCA Safety Flash system depends on Members sharing information and so avoiding repeat incidents. Please consider adding [email protected] to your internal distribution list for safety alerts or manually submitting information on incidents you consider may be relevant. All information is anonymised or sanitised, as appropriate.
IMCA’s store terms and conditions (https://www.imca-int.com/legal-notices/terms/) apply to all downloads from IMCA’s website, including this document.
IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.