Routine test of lifeboat launch results in fatalities
What happened?
On the Auger platform in the Gulf of Mexico during routine testing, a lifeboat fell into the sea with two persons on-board. Both were fatally injured.
The incident occurred during a routine and mandatory test of a lifeboat launch and retrieval capabilities. It included testing of the centrally operated release mechanism, which detaches the lifeboat from the lifting mechanism. On completion of the test, the lifeboat was being recovered to its launching davits.
On reaching a height above the water of approximately 25-30 metres, the lifeboat support point released causing the lifeboat to swing in a pendulum fashion. The forward support point then separated, and the lifeboat fell to the sea.
This incident is still being investigated and any findings must necessarily wait upon that investigation.
Members may wish to:
- Suspend all testing involving launching and recovery of lifeboats where the lifeboat is manned;
- Suspend all maintenance and training requiring a person or persons to be inside lifeboats, unless the lifeboat is thoroughly and comprehensively secured in the davits by launch prevention devices.
Members may wish to refer to:
Safety Event
Published: 4 September 2019
Download: 
IMCA SF 21/19
IMCA Safety Flashes
Submit a Report
IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of all. The effectiveness of the IMCA Safety Flash system depends on Members sharing information and so avoiding repeat incidents. Please consider adding [email protected] to your internal distribution list for safety alerts or manually submitting information on incidents you consider may be relevant. All information is anonymised or sanitised, as appropriate.
IMCA’s store terms and conditions (https://www.imca-int.com/legal-notices/terms/) apply to all downloads from IMCA’s website, including this document.
IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.