Notice: Function _load_textdomain_just_in_time was called incorrectly. Translation loading for the the-events-calendar domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /home/storm/sites/dev-imca-int-com-1/public/wp-includes/functions.php on line 6114

Notice: Function _load_textdomain_just_in_time was called incorrectly. Translation loading for the broken-link-checker domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /home/storm/sites/dev-imca-int-com-1/public/wp-includes/functions.php on line 6114

Notice: Function _load_textdomain_just_in_time was called incorrectly. Translation loading for the woocommerce-eu-vat-number domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /home/storm/sites/dev-imca-int-com-1/public/wp-includes/functions.php on line 6114
Punctured aerosol results in chemical burns - DEV imca
Skip to content

Punctured aerosol results in chemical burns

A member has reported the following incident which occurred in a crane repair workshop, where pieces of lifting equipment are routinely inspected for cracks and/or deformities.

A large hook was being stripped of paint in preparation for inspection. Aerosol paint stripper was being used, with a technician then using a 6000rpm grinder with wire brush cup attachment. The work area is shown below, including the relative positions of the hook and the aerosol.

As the technician was brushing the bottom of the hook, hard particles or brush wires were projected, striking one of the nearly full paint remover aerosol cans sitting on the bench nearby. The particle punctured the can about 1″ up from its base and caused the contents to violently spew from the can while it spun wildly on the bench. This happened so quickly that the technician was sprayed around his head, shoulders and back with paint remover before he could move away.

He moved as quickly as he could to the wash basin in the workshop and thoroughly rinsed himself off which, along with the protection of his safety glasses, hard hat and shirt contributed to him only experiencing slight chemical burns on the upper portions of his body.

Fortunately, the gaseous contents of the aerosol can did not ignite as they spewed from the can. If they had, the employee could have been engulfed in fire and suffered much more extreme injuries.

The company concerned has restated the importance of removing aerosol cans, returning them to proper flammable storage areas/containers when carrying out work of this nature. Returning to the picture above – to the right of the work bench is a yellow flammable container storage locker. Had it been used, this incident would not have happened.

Safety Event

Published: 1 January 2003
Download: IMCA SF 01/03

IMCA Safety Flashes
Submit a Report

IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of all. The effectiveness of the IMCA Safety Flash system depends on Members sharing information and so avoiding repeat incidents. Please consider adding safetyreports@imca-int.com to your internal distribution list for safety alerts or manually submitting information on incidents you consider may be relevant. All information is anonymised or sanitised, as appropriate.

IMCA’s store terms and conditions (https://www.imca-int.com/legal-notices/terms/) apply to all downloads from IMCA’s website, including this document.

IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.