Near-miss: Mooring without port assistance
A member has reported several incidents in which a shored-based mooring gang was not made available when a vessel arrived for a regular call at a designated berth. Rather than stop the job, the vessel crews had adopted an unacceptable ‘routine’ of jumping between the vessel and the jetty to conduct the mooring on their own. A third-party assurance official was recently aboard and witnessed this behaviour – he immediately exercised the stop work policy and communicated a near miss report.
Investigation revealed the following:
- Neither the client nor the port authority were planning and preparing adequate support for vessel mooring operations;
- Everyone onboard had become complacent and accepting of a non-compliant, unsafe practice resulting in multiple exposures to the risk of falling overboard;
- Although some vessel crew had raised some safety observations about this situation, no one had elevated their concerns to shore-side management or raised a near miss report;
- The stop work policy was not being implemented by the crew – it took a visiting third party to identify the hazardous occurrence, put a stop to it, and report it to the office.
Summary of actions taken:
- The client was informed immediately. The client provided feedback with acceptance and commitment to addressing the issue to ensure it did not happen again;
- Shore-based management have strongly engaged the client and port authority – the vessel has since called at the berth on several occasions and mooring gangs have been present for all mooring and unmooring operations;
- A company regional director immediately conducted a vessel visit to engage with the Master and crew to discuss the incident.
Our member notes that when crew members draw attention to unsafe acts or unsafe conditions, or any hazardous occurrences, these should be brought to the knowledge of shipboard management and action should be taken – it is not acceptable to ignore these or do nothing.
Members’ attention is drawn to the following:
Safety Event
Published: 31 March 2016
Download: IMCA SF 07/16
IMCA Safety Flashes
Submit a Report
IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of all. The effectiveness of the IMCA Safety Flash system depends on Members sharing information and so avoiding repeat incidents. Please consider adding [email protected] to your internal distribution list for safety alerts or manually submitting information on incidents you consider may be relevant. All information is anonymised or sanitised, as appropriate.
IMCA’s store terms and conditions (https://www.imca-int.com/legal-notices/terms/) apply to all downloads from IMCA’s website, including this document.
IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.