Notice: Function _load_textdomain_just_in_time was called incorrectly. Translation loading for the the-events-calendar domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /home/storm/sites/dev-imca-int-com-1/public/wp-includes/functions.php on line 6114

Notice: Function _load_textdomain_just_in_time was called incorrectly. Translation loading for the broken-link-checker domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /home/storm/sites/dev-imca-int-com-1/public/wp-includes/functions.php on line 6114

Notice: Function _load_textdomain_just_in_time was called incorrectly. Translation loading for the woocommerce-eu-vat-number domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /home/storm/sites/dev-imca-int-com-1/public/wp-includes/functions.php on line 6114
Hydraulic injury to hand - DEV imca
Skip to content

Hydraulic injury to hand

Work was being undertaken servicing an engine. Immediately prior to the accident the first cylinder head had been removed using the equipment and procedures normally used for this task. The hydraulic power tool for tensioning the main retaining bolts (regulated at 500 bar) was applied and pressured up to 490 bar. The injured person’s left hand was on the body of the jack. As he slackened the main nut on the tensioned bolt a small release of HP oil was injected into his left hand.

The cause of the release was the failure of an HP seal on the hydraulic jack that allowed a high velocity discharge of a small quantity of hydraulic oil to be released through a small aperture. The failure was attributed to a missing backup ‘o’-ring seal. Even though the injured person was wearing PPE, the jet of oil penetrated his left hand.

The reason for the missing backup ‘o’-ring could not be established. It was either omitted by the manufacturer or during maintenance. The risk assessment that was carried out did not identify that high pressure could be contained within the jack.

The company involved has identified the following:

  • the need for a specific procedure regarding the changing of seal/’o’-ring assemblies;
  • investigation and availability of gloves that provide additional protection against equipment that may involve high pressure hazards;
  • hydraulic jacks should be included on planned maintenance system;
  • additional PPE (full face visors) to be worn while performing this task in future.

Safety Event

Published: 1 October 2000
Download: IMCA SF 06/00

IMCA Safety Flashes
Submit a Report

IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of all. The effectiveness of the IMCA Safety Flash system depends on Members sharing information and so avoiding repeat incidents. Please consider adding safetyreports@imca-int.com to your internal distribution list for safety alerts or manually submitting information on incidents you consider may be relevant. All information is anonymised or sanitised, as appropriate.

IMCA’s store terms and conditions (https://www.imca-int.com/legal-notices/terms/) apply to all downloads from IMCA’s website, including this document.

IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.