Skip to content

Dropped object near-miss: Lifting

During the lifting of twelve lightweight steel plates (2m x 15-30cm) width from ground level to a vessel work platform at 35 m elevation, the load shifted during the transfer to the work platform causing the plates to fall into a barricaded area below. The barricaded area was free from workers at the time; there were no injuries.

What went wrong:

  • Obstruction/cramped workspace: The receiving area was obstructed by a scaffold rail and ladder which restricted the work space and made handling of the load awkward;
  • There was a lack of management support: The Mechanical Supervisor and Lifting Supervisor failed to ensure that the scaffold design at an early stage was such that it facilitated the delivery of loads;
  • Complacency: the rigging foreman, despite being fully qualified and competent for his position, failed to investigate alternative options to transfer the load (platform/scaffold modification, separating the load out into various sizes, use of a material lifting basket etc.);
  • Short cut taken: The riggers and rigging foreman had taken a short cut and combined mixed sizes of steel plates into one load instead of separating out the load into various sizes or utilizing a material basket or modifying the scaffold in the receiving area to receive the load;
  • There was no proper risk assessment of movement of the mixed load during transfer;
  • There had been no proper toolbox talk before the job started with a new crew, and one rigger falsely signed as having attended the safety task instruction with the crew.

Safety Event

Published: 2 October 2015
Download: IMCA SF 14/15

IMCA Safety Flashes
Submit a Report

IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of all. The effectiveness of the IMCA Safety Flash system depends on Members sharing information and so avoiding repeat incidents. Please consider adding [email protected] to your internal distribution list for safety alerts or manually submitting information on incidents you consider may be relevant. All information is anonymised or sanitised, as appropriate.

IMCA’s store terms and conditions (https://www.imca-int.com/legal-notices/terms/) apply to all downloads from IMCA’s website, including this document.

IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.