Skip to content

Crewman fatally injured during mooring operations

A member has reported an incident in which a crewman suffered fatal injuries after being hit by a snapping chain and mooring rope connection. The incident occurred during mooring operations whilst manoeuvring two vessels together.

At the project worksite, one vessel was being manoeuvred towards the appointed workplace using a mooring line and winch. Rigging was slackened by the winch on one vessel; then the angle between the two vessels increased, which caused an increase in tension. At that moment the chain snapped at the pad-eye connection on one vessel, and a deckhand was hit by the chain and mooring rope as it swung across the deck causing fatal injuries.

Figure 1 - vessels move towards appointed workplace
Figure 1 – vessels move towards appointed workplace
Figure 2 -Position of crewman in line of fire (circled)
Figure 2 -Position of crewman in line of fire (circled)
Figure 3 -Path of chain after failure under tension
Figure 3 -Path of chain after failure under tension

Our member’s investigation revealed the following:

  • The deckhand moved into ‘in the line of fire’ in the path of the breaking chain;
  • The breaking strain of the equipment used was underestimated in relation to the work being undertaken;
  • Limited communication and poor sight lines between vessel masters, winch operator and deckhand were a factor.
Figure 4 -Snapped chain
Figure 4 -Snapped chain
Figure 5 -Mooring rope similar to that used in the operation
Figure 5 -Mooring rope similar to that used in the operation

Our member made the folllowing recommendations:

  • Thorough revision of company procedures and risk assessments for this task, including types of connection, winches and towing equipment, and communications;
  • Ensure all persons involved are involved in toolbox talks before this task;
  • Check certification and fitness for use of all lifting and towing equipment (bollards, ‘bridle’ connection, wires, ropes);
  • Establish clear communication (radio, signals and visibility) between the master of the towing/pushing vessel, the crane or winch operator and any personnel on deck.
Figure 6 -Scene of incident (green line indicates towing line, red line indicates snapped towing line, yellow area indicates position of crewman)
Figure 6 -Scene of incident (green line indicates towing line, red line indicates snapped towing line, yellow area indicates position of crewman)

Perhaps the most important point highlighted by our member is that crew should take great care in their movements on deck in relation to possible danger from equipment failure, particularly with regard to ropes, towing and rigging equipment.

Safety Event

Published: 10 November 2010
Download: IMCA SF 07/10

IMCA Safety Flashes
Submit a Report

IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of all. The effectiveness of the IMCA Safety Flash system depends on Members sharing information and so avoiding repeat incidents. Please consider adding [email protected] to your internal distribution list for safety alerts or manually submitting information on incidents you consider may be relevant. All information is anonymised or sanitised, as appropriate.

IMCA’s store terms and conditions (https://www.imca-int.com/legal-notices/terms/) apply to all downloads from IMCA’s website, including this document.

IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.