Skip to content

Copies of Crosby shackles

A member has advised that while inspecting shackles in West Africa, it became evident several copies of Crosby shackles have been introduced to the marketplace. These shackles are said to be not up to the quality standards of RRC-271D and it is recommended they be immediately removed from service.

The points to look for in deciding whether you have a Crosby shackle or a copy are:

  • on the face:
    1. the Crosby name should be embossed as per the Crosby logo;
    2. the CE mark should appear;
    3. markings of 45 degree angles;
  • on the rear of the shackles, two different groupings of IDs should appear (3 for Belgium manufactures) providing full traceability of the shackle;
  • the pin should also be stamped (d) on the head with a traceable ID number.

IMCA has also heard from Crosby Europe that these shackles are circulating in both the African and the European markets. They also advise that WLL (t), body size (inch) should also appear on its shackles. On some recent shackles there could also be a marking such as ‘6’ for the grade, which may appear on the shackle bow and pin.

Safety Event

Published: 2 December 2004
Download: IMCA SF 11/04

IMCA Safety Flashes
Submit a Report

IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of all. The effectiveness of the IMCA Safety Flash system depends on Members sharing information and so avoiding repeat incidents. Please consider adding [email protected] to your internal distribution list for safety alerts or manually submitting information on incidents you consider may be relevant. All information is anonymised or sanitised, as appropriate.

IMCA’s store terms and conditions (https://www.imca-int.com/legal-notices/terms/) apply to all downloads from IMCA’s website, including this document.

IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.