Anchor handling incident
An incident occurred on a vessel which was conducting an anchor handling operation. A sudden tensioning and de-tensioning of the tugger wire occurred, probably due to the vessel rising or falling on the swell. The second mate, who had run towards the tugger wire, was hit by the tensioned wire, thrown into the air, landed heavily and was knocked unconscious.
The contractor involved has elected to review their anchor handling operations procedures in the light of this incident. They are also to include an overview of their Safety Management System and emphasis placed on risk assessment for each task undertaken in their Safety Induction.
Safety Event
Published: 1 May 1997
Download: 
IMCA SF 03/97
IMCA Safety Flashes
Submit a Report
IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of all. The effectiveness of the IMCA Safety Flash system depends on Members sharing information and so avoiding repeat incidents. Please consider adding [email protected] to your internal distribution list for safety alerts or manually submitting information on incidents you consider may be relevant. All information is anonymised or sanitised, as appropriate.
IMCA’s store terms and conditions (https://www.imca-int.com/legal-notices/terms/) apply to all downloads from IMCA’s website, including this document.
IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.