Accidental activation of emergency stop during saturation diving operations
What happened?
Emergency stop buttons were accidently activated on a vessel engaged in Saturation Diving Operations in the 500m Zone. This caused the Starboard Voith Schneider Propulsion (VSP) System to trip out.
Much happened in a single minute: at 09:27:00 DPOs noticed that a warning light on the Starboard Voith Control Station and Engine Room Control were immediately informed. At 09:27:05 the Starboard VSP System stopped working but the vessel maintained its position. At 09:27:14 there was a DP “Yellow” alarm. At the same time, Dive Control was informed and started to return their Divers to the bell, and the Vessel Master and the client came to the Bridge.
Divers were safely recovered, and the vessel moved off-site and outside the 500m Zone. There were no injuries or harm done. The Starboard VSP System took a little under an hour to bring back online.
What went wrong?
The VSP tripped out because both lube oil pumps stopped. Investigation revealed that the pumps were found to have stopped because both the emergency stop buttons for the pumps had been activated.
What were the causes?
There were no protective covers on the emergency stop buttons. The buttons were inadvertently pressed by engine room crew lacking situational awareness. In this case, the control panels were located in a narrow access passageway.
What actions were taken? What lessons were learned?
- Improve situational awareness of all crew and improve/reiterate shipboard familiarisation;
- Be reminded of position of emergency stop buttons, especially in small alleyways or spaces where there are risks of accidental activation;
- Install covers on all emergency stop buttons;
- More thorough job safety analysis (JSA) and toolbox talks (TBT) to be carried out covering any routine maintenance activities in Engine spaces.
Members may wish to refer to the following incidents:
Safety Event
Published: 23 August 2019
Download: 
IMCA SF 20/19
IMCA Safety Flashes
Submit a Report
IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of all. The effectiveness of the IMCA Safety Flash system depends on Members sharing information and so avoiding repeat incidents. Please consider adding [email protected] to your internal distribution list for safety alerts or manually submitting information on incidents you consider may be relevant. All information is anonymised or sanitised, as appropriate.
IMCA’s store terms and conditions (https://www.imca-int.com/legal-notices/terms/) apply to all downloads from IMCA’s website, including this document.
IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.