Near-miss: Supply vessel in path of helicopter making approach to platform
The Marine Safety Forum has published the following safety flash regarding an incident in which a helicopter aborted an approach to a fixed installation because a supply vessel was positioned inside the ‘go around’ and take-off flight path.
Even though an engine failure is a rare and unlikely event, helicopters are always flown so that they can suffer an engine failure and safely ‘fly-away’ on its remaining engine. If a helicopter suffers a single engine failure at low speed (for example during the take-off and landing), then it needs to ‘dive’ on the speed and is likely to use all of the height between it and the surface to achieve this. Therefore, if a vessel is positioned within the helicopters ‘go-around’ flight path then there is a risk of collision during a single engine ‘go-around’.
The safety flash – including illustration – can be downloaded from marinesafetyforum.org/upload-files//safetyalerts/msf-safety-flash-15.08.pdf
Safety Event
Published: 3 March 2015
Download: 
IMCA SF 03/15
IMCA Safety Flashes
Submit a Report
IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of all. The effectiveness of the IMCA Safety Flash system depends on Members sharing information and so avoiding repeat incidents. Please consider adding safetyreports@imca-int.com to your internal distribution list for safety alerts or manually submitting information on incidents you consider may be relevant. All information is anonymised or sanitised, as appropriate.
IMCA’s store terms and conditions (https://www.imca-int.com/legal-notices/terms/) apply to all downloads from IMCA’s website, including this document.
IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.