Notice: Function _load_textdomain_just_in_time was called incorrectly. Translation loading for the the-events-calendar domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /home/storm/sites/dev-imca-int-com-1/public/wp-includes/functions.php on line 6114

Notice: Function _load_textdomain_just_in_time was called incorrectly. Translation loading for the broken-link-checker domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /home/storm/sites/dev-imca-int-com-1/public/wp-includes/functions.php on line 6114

Notice: Function _load_textdomain_just_in_time was called incorrectly. Translation loading for the woocommerce-eu-vat-number domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /home/storm/sites/dev-imca-int-com-1/public/wp-includes/functions.php on line 6114
Dropped object incident - DEV imca
Skip to content

Dropped object incident

A member has reported an incident in which an object of 100kg fell 2m onto a scaffold platform. The incident occurred in port during the removal of a 55t tensioning mechanism from a horizontal lay system (HLS) on board a vessel. The tensioner was pre-rigged with primary rigging to the main crane and auxiliary rigging to the upper side of the horizontal lay system. The strain was taken on the rigging to allow the unbolting of the tensioner from the HLS. Once the bolt removal was complete the deck foreman instructed the crane driver to take more load on the crane. When the crane took more load on the primary rigging the rigging came into contact with the product guide bars and pushed a guide bar off the horizontal lay system. The guide bar weighed 100kg and fell 2m onto a scaffold platform on the HLS. There were no injuries.

After the guide bar had been pushed off the horizontal lay system
After the guide bar had been pushed off the horizontal lay system
Guide bar
Guide bar

Our member was made a number of modifications to the design of the horizontal lay system, in order to prevent recurrence:

  • Limit the requirement for auxiliary rigging to install or remove a tensioner;
  • Fit end stops onto the guide bar slide guides to stop them being pushed off the HLS.

Our member noted that all future lift plans or procedures with respect to the HLS should ensure that the guide bars are removed before installation/removal of a tensioner, or securely lashed together to ensure they do not come into contact with any rigging.

Members may wish to refer to the following similar incidents (key words: dropped object):

Safety Event

Published: 3 October 2014
Download: IMCA SF 16/14

IMCA Safety Flashes
Submit a Report

IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of all. The effectiveness of the IMCA Safety Flash system depends on Members sharing information and so avoiding repeat incidents. Please consider adding safetyreports@imca-int.com to your internal distribution list for safety alerts or manually submitting information on incidents you consider may be relevant. All information is anonymised or sanitised, as appropriate.

IMCA’s store terms and conditions (https://www.imca-int.com/legal-notices/terms/) apply to all downloads from IMCA’s website, including this document.

IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.