Falling object – Failure of lifting appliance
An IMCA member has reported a lifting appliance failure that occurred in connection with the transport of oil barrels. Barrels filled with oil were being lifted by a vessel crane from the shore onto the vessel. During one of these lifts, one of the barrel clamps came loose from the barrel. The other barrel clamp also came loose, allowing the barrel to fall onto the deck of the vessel where it burst. There were no injuries.
Because of the oil spill on deck, the SOPEP team was mustered. The oil spill was contained, no oil entered the water, and the spill was cleaned up.
The company conducted an investigation into the accident, which concluded that the most likely cause was incorrect mounting of the barrel clamps in the past leading to deformation of the clamps, which led to the load being dropped.
The company took the following actions:
- other vessels have been alerted to the incident, via distribution of an internal safety flash;
- toolbox meetings have been held onboard the company’s other vessels to demonstrate the correct use of barrel clamps.
Safety Event
Published: 27 February 2006
Download: 
IMCA SF 02/06
IMCA Safety Flashes
Submit a Report
IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of all. The effectiveness of the IMCA Safety Flash system depends on Members sharing information and so avoiding repeat incidents. Please consider adding safetyreports@imca-int.com to your internal distribution list for safety alerts or manually submitting information on incidents you consider may be relevant. All information is anonymised or sanitised, as appropriate.
IMCA’s store terms and conditions (https://www.imca-int.com/legal-notices/terms/) apply to all downloads from IMCA’s website, including this document.
IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.