Parting of a crane lift wire
During a lifting operation on board one of our members’ ships, when an 82.5 te riser anchor was to be installed on the seabed, the main crane wire parted after the load had been swung away from the deck, causing the anchor to drop to the seabed. Fortunately no one was injured.
The cause of the crane wire separation appears to have been due to slack being paid out during hook up whereby the wire over ran the sheave’s flange. When the load was raised, the wire slipped over the sheave and ended up bearing on the sheave pin rather than the sheave itself. As a result the wire’s lifting capability was severely degraded since it was subject to the sharp bend radius and as a consequence parted.
The contractor involved as implemented the following:
- Checks to be made on all cranes to ensure that the lift wire cannot come out of the sheave(s) either on the jib or lifting block during lift operations.
- A viewing arrangement has been installed to ensure that the crane operator can see that the wire fits centrally in the sheave(s) during lifting operations.
- As an additional precaution, just prior to raising the load, when the full load comes onto the crane wire, the person directing crane operations on deck should view the sheaves, if practical, to ensure that the lift wire is correctly located.
Safety Event
Published: 1 July 2000
Download: 
IMCA SF 03/00
IMCA Safety Flashes
Submit a Report
IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of all. The effectiveness of the IMCA Safety Flash system depends on Members sharing information and so avoiding repeat incidents. Please consider adding safetyreports@imca-int.com to your internal distribution list for safety alerts or manually submitting information on incidents you consider may be relevant. All information is anonymised or sanitised, as appropriate.
IMCA’s store terms and conditions (https://www.imca-int.com/legal-notices/terms/) apply to all downloads from IMCA’s website, including this document.
IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.