Technical Service Bulletin from Broco/Rankin – BR22 Plus Exothermic Cutting Torch
The Association of Diving Contractors International (ADCI) has circulated an updated Technical Service Bulletin from Broco/Rankin relating to the BR22 Plus Exothermic Cutting Torch. This was sent out by Broco/Rankin on13 March 2018.
The bulletin, available here, notes that “a recent report of an external oxygen leak from the control valve of a BR22 PLUS prompted an investigation to determine root cause. The result of that investigation concluded that machining debris in the O-ring groove of the Control Valve Nut has interfered with the Oxygen seal in the valve assembly“.
Members using this equipment should download and read the bulletin, and take the actions recommended therein.
Leak Test Procedure
Safety Event
Published: 22 March 2018
Download: IMCA SF 07/18
IMCA Safety Flashes
Submit a Report
IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of all. The effectiveness of the IMCA Safety Flash system depends on Members sharing information and so avoiding repeat incidents. Please consider adding [email protected] to your internal distribution list for safety alerts or manually submitting information on incidents you consider may be relevant. All information is anonymised or sanitised, as appropriate.
IMCA’s store terms and conditions (https://www.imca-int.com/legal-notices/terms/) apply to all downloads from IMCA’s website, including this document.
IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.