Two industrial vehicle incidents
Though these two incidents do not pertain to the marine environment, the underlying issues involved – traffic management and separation, planning and safe systems of work, risk assessment, work at height etc. – are of relevance and interest to IMCA members.
Incident 1 – Driver fatally crushed
What happened?
A visiting HGV (Heavy Goods Vehicle) driver was delivering materials to a site when he was crushed to death as a forklift truck overturned whilst lifting a load from the trailer of the HGV.
What went wrong?
Investigation revealed that the forklift truck had been overloaded and that visiting delivery drivers were not kept at a safe distance from the loading and unloading operations.
The company was fined £1.2 million. The HSE inspector said: “Standing too close to where loading or unloading work is being carried out can put people in harm’s way so people, such as delivery drivers, should be in a position of safety when forklift trucks are operating. This tragic incident could have been avoided if the company had implemented a safe procedure to ensure that pedestrians were kept at a safe distance during loading and unloading work.”
Incident 2 – Employee falls from bonnet of vehicle
What happened?
An employee fell from the bonnet of a tar laying machine. He was standing on the bonnet of the machine to cut the branches of overhanging trees when he fell from the bonnet into the tar hopper. He sustained a fractured back and damaged spinal cord causing permanent paralysis from the waist down.
What went wrong?
Investigation found that the company had failed to plan the task in hand, resulting in an employee using the bonnet of the tar laying machine which was not a safe place to work.
Serious and life changing injuries could have easily been prevented had the company planned the work at height, including an assessment of the risks and either avoidance of working at height using long reach tools or measures being put in place to prevent a fall.
Members may wish to review the following incident:
Safety Event
Published: 12 December 2017
Download: 
IMCA SF 30/17
IMCA Safety Flashes
Submit a Report
IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of all. The effectiveness of the IMCA Safety Flash system depends on Members sharing information and so avoiding repeat incidents. Please consider adding safetyreports@imca-int.com to your internal distribution list for safety alerts or manually submitting information on incidents you consider may be relevant. All information is anonymised or sanitised, as appropriate.
IMCA’s store terms and conditions (https://www.imca-int.com/legal-notices/terms/) apply to all downloads from IMCA’s website, including this document.
IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.