Notice: Function _load_textdomain_just_in_time was called incorrectly. Translation loading for the the-events-calendar domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /home/storm/sites/dev-imca-int-com-1/public/wp-includes/functions.php on line 6114

Notice: Function _load_textdomain_just_in_time was called incorrectly. Translation loading for the broken-link-checker domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /home/storm/sites/dev-imca-int-com-1/public/wp-includes/functions.php on line 6114

Notice: Function _load_textdomain_just_in_time was called incorrectly. Translation loading for the woocommerce-eu-vat-number domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /home/storm/sites/dev-imca-int-com-1/public/wp-includes/functions.php on line 6114
Near-miss: Incorrect rigging of life raft hydrostatic release - DEV imca
Skip to content

Near-miss: Incorrect rigging of life raft hydrostatic release

IMCA’s attention has been drawn to a near miss in which it was found that the hydrostatic release on a life raft was not correctly rigged. This was discovered following the replacement of a life raft. It was noticed that if the collar on the Senhouse slip was lifted for life raft launch, it would not release the strap as the lashing that connected it to the hydrostatic release unit was tied too tightly, so the arm would not easily slip through and release. This was due to the hitches in the lashing being carried on too far up towards the slip, not leaving enough room for the arm of the slip to move sufficiently.

Lashing tied too tight where usually connected to Senhouse slip

The following points are to be noted:

  • The Senhouse slip should not be attached through a lashing and should be directly attached to the hydrostatic release unit;
  • Hydrostatic release units are fitted with a yellow plastic that aids the release of the Senhouse slip when released. If fitted through a lashing, this can create friction making the operator unable to launch the life raft safely;
  • The lashing can still be used in the securing of the life raft, but in a different position. Care should be taken to ensure that the painter line is tied through the red ring on the Hydrostatic release unit.

Further information on correct securing of life rafts can be found in the UK Marine & Coastguard Agency (MCA) Marine Guidance Note 343.

Correctly stowed HRU on life raft
Incorrectly rigged HRU

Safety Event

Published: 12 May 2017
Download: IMCA SF 10/17

Relevant life-saving rules:
IMCA Safety Flashes
Submit a Report

IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of all. The effectiveness of the IMCA Safety Flash system depends on Members sharing information and so avoiding repeat incidents. Please consider adding safetyreports@imca-int.com to your internal distribution list for safety alerts or manually submitting information on incidents you consider may be relevant. All information is anonymised or sanitised, as appropriate.

IMCA’s store terms and conditions (https://www.imca-int.com/legal-notices/terms/) apply to all downloads from IMCA’s website, including this document.

IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.