Notice: Function _load_textdomain_just_in_time was called incorrectly. Translation loading for the the-events-calendar domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /home/storm/sites/dev-imca-int-com-1/public/wp-includes/functions.php on line 6114

Notice: Function _load_textdomain_just_in_time was called incorrectly. Translation loading for the broken-link-checker domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /home/storm/sites/dev-imca-int-com-1/public/wp-includes/functions.php on line 6114

Notice: Function _load_textdomain_just_in_time was called incorrectly. Translation loading for the woocommerce-eu-vat-number domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /home/storm/sites/dev-imca-int-com-1/public/wp-includes/functions.php on line 6114
Unintentional release of diving helmet - neck dam/helmet securing arrangements - DEV imca
Skip to content

Unintentional release of diving helmet – neck dam/helmet securing arrangements

A member reported two incidents in which there has been unintentional release between neck ring and helmet on a KM17C diving helmet during saturation diving operations. Members are encouraged to ensure that diving personnel are aware and that they check the interface between helmet and its securing arrangement towards other equipment supporting the diver. Working conditions could also give same results, e.g. working close to (taut) wires or large insertion bolts, etc.

Our member identified the following corrective actions:

  • Verify that interface between helmet and other diving equipment is such that it cannot hook up the release mechanism;
  • Be aware of the potential of release such that operational measures could be taken to prevent this;
  • Report any further problems (with helmet and locking mechanisms) immediately.
Incident details
Incident details

The manufacturer has developed a pull pin sleeve, which may also work to prevent this from recurring. See the Kirby Morgan website for more details: kirbymorgan.com/support/bulletins/2012/bulletin-07-2012.

A series of photographs follows for illustrative purposes:

Figure 1 - Diver's equipment interfacing with harness and jump jacket
Diver’s equipment interfacing with harness and jump jacket
Figure 2 - Kirby Morgan 17C divers helmet with Jewel 601 reclaim hat
Kirby Morgan 17C divers helmet with Jewel 601 reclaim hat
jacket
Clash between diver helmet pull pin and jump jacket
Helmet/neck ring pull pin securing mechanism (L) closed position (R) open position
Helmet/neck ring pull pin securing mechanism (L) closed position (R) open position
Evaluation of the bail-out system - position of helmet/neck ring pull pins in relatio nto divers harness (L) head in normal upright position (R) head bent forward, looking down
Evaluation of the bail-out system – position of helmet/neck ring pull pins in relation to diver’s harness (L) head in normal upright position (R) head bent forward, looking down
Position of helmet/neck ring pull pin in relation with bailout/jump jacket equipment with head bent forward looking down
Position of helmet/neck ring pull pin in relation with bailout/jump jacket equipment with head bent forward looking down

Safety Event

Published: 2 August 2016
Download: IMCA SF 20/16

IMCA Safety Flashes
Submit a Report

IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of all. The effectiveness of the IMCA Safety Flash system depends on Members sharing information and so avoiding repeat incidents. Please consider adding safetyreports@imca-int.com to your internal distribution list for safety alerts or manually submitting information on incidents you consider may be relevant. All information is anonymised or sanitised, as appropriate.

IMCA’s store terms and conditions (https://www.imca-int.com/legal-notices/terms/) apply to all downloads from IMCA’s website, including this document.

IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.