Notice: Function _load_textdomain_just_in_time was called incorrectly. Translation loading for the the-events-calendar domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /home/storm/sites/dev-imca-int-com-1/public/wp-includes/functions.php on line 6114

Notice: Function _load_textdomain_just_in_time was called incorrectly. Translation loading for the broken-link-checker domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /home/storm/sites/dev-imca-int-com-1/public/wp-includes/functions.php on line 6114

Notice: Function _load_textdomain_just_in_time was called incorrectly. Translation loading for the woocommerce-eu-vat-number domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /home/storm/sites/dev-imca-int-com-1/public/wp-includes/functions.php on line 6114
Serious dropped object incidents - DEV imca
Skip to content

Serious dropped object incidents

A member has reported two serious dropped object incidents. In the first, an object weighing 100kg was dropped 2.4m. In the second, an object weighing 15.3kg fell 20m, struck a worker on the head and shoulders and caused a first aid injury.

Incident 1:

During a ‘routine’ change out of the HOM (Hang Off Module) pads, a pad weighing 100kg was dropped 2.4m. The pad landed on the portable access steps on which the operations technician was stood. The impact caused damage to the steps and caused the technician to lose his balance and fall over.

Our member’s investigation revealed the following:

  • The female thread in the HOM pad assembly was corroded;
  • Due to its location the corrosion was not readily identifiable at the time the eye bolt was fitted;
  • Owing to the eyebolt having to pass through a lifting bracket the effective thread was reduced by 10mm.
Hang-off module (HOM)
Hang-off module (HOM)
Damaged steps
Damaged steps

Our member took the following specific actions:

  • Redesign of the lifting device – three threaded bolts now used to secure the lifting brackets in position;
  • Weld type pad eyes will be fitted to all HOM pad lifting brackets;
  • All tapped holes to be checked and re-drilled and tapped the next size up if found to be worn;
  • Once all sizes are established, stainless steel grub screws will be purchased and will be greased and fitted to all tapped lifting holes on HOM pads to help eliminate corrosion.

Incident 2:

On a pipelay vessel, a side roller guide for the track chains fell from the upper tensioner onto the protection roof of the lower workstation, before administering a glancing blow to a rigger, resulting in first aid treatment. The object weighed 15.3kg and fell 20m.

Side roller guide
Side roller guide
Pipelay tower
Pipelay tower

Our member’s investigation revealed the following:

  • The retaining bolts on the bearing rail had been sheared;
  • The upper section had only one bolt in place.

All members are encouraged to check carefully all equipment used at height for:

  • Corrosion;
  • Insufficient security of bolts and tensioners.

These incidents highlight the need for constant vigilance for dropped objects. The re-occurrence of dropped object incidents is evidence that dropped objects are still harming and have the potential to kill. IMCA member’s have reported a number of dropped object incidents already this year.

Members may wish to refer to the following similar incidents (key words: dropped, corrosion):

Safety Event

Published: 16 June 2014
Download: IMCA SF 09/14

IMCA Safety Flashes
Submit a Report

IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of all. The effectiveness of the IMCA Safety Flash system depends on Members sharing information and so avoiding repeat incidents. Please consider adding safetyreports@imca-int.com to your internal distribution list for safety alerts or manually submitting information on incidents you consider may be relevant. All information is anonymised or sanitised, as appropriate.

IMCA’s store terms and conditions (https://www.imca-int.com/legal-notices/terms/) apply to all downloads from IMCA’s website, including this document.

IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.