Skip to content

Safe embarkation and disembarkation of Marine Pilots

What happened?

During the embarkation of the Pilot to the vessel, the Pilot observed that a step on the Pilot ladder was not in good condition (broken). The Pilot implemented the Stop Work Policy and informed the Master of the vessel, noting that the Pilot ladder would need changing before he would embark. The pilot ladder was subsequently replaced and the pilot boarded the vessel.

What were the causes? What went wrong?

The Pilot ladder was not in good condition. It had not been inspected before it was put in place by the vessel crew.

Members are reminded to ensure that:

  • The technical specification of pilot ladders meets IMO requirements as per Resolution A.1045(27);
  • Persons ordering or sourcing new pilot ladders should clearly know the IMO requirements and should specify to suppliers that every step on the ladder should be free of knots;
  • New pilot ladders are thoroughly checked before use to verify quality and to ensure that the steps are clear from knots;
  • Pilot ladders are always checked by the officer in charge before rigging and use to ensure it is fit for purpose, in good condition and secured properly to the vessel.

Members may wish to refer to the following incidents:

The following documents will be useful:

Safety Event

Published: 14 August 2020
Download: IMCA SF 24/20

Relevant life-saving rules:
IMCA Safety Flashes
Submit a Report

IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of all. The effectiveness of the IMCA Safety Flash system depends on Members sharing information and so avoiding repeat incidents. Please consider adding [email protected] to your internal distribution list for safety alerts or manually submitting information on incidents you consider may be relevant. All information is anonymised or sanitised, as appropriate.

IMCA’s store terms and conditions (https://www.imca-int.com/legal-notices/terms/) apply to all downloads from IMCA’s website, including this document.

IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.