Near-miss: Crane hook block dropped to deck
A member has reported an incident in which a crane winch wire parted and the hook block was dropped to deck. The incident occurred when the crane operator began to extend the jib of the crane without letting out the winch wire at the same time. The extending jib caught the hook block and caused the crane winch wire to part. The hook block, which weighed 30kg, dropped 10 metres (m) to the deck. There were no injuries.
An investigation revealed the following:
- The crane operator was not paying proper attention to the extending jib;
- The crane operator had not informed his supervisor that this work was taking place;
- The crane operator was effectively working alone: there was no-one else watching the crane whilst it was being operated;
- There was no locking or warning mechanism fitted to the crane to prevent this from happening.
The following measures were taken to prevent recurrence:
- Review training of persons operating cranes and winches;
- Review of risk assessment for this job;
- Investigate installation of lock protection sensors for this kind of crane.
Safety Event
Published: 25 January 2012
Download: 
IMCA SF 01/12
IMCA Safety Flashes
Submit a Report
IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of all. The effectiveness of the IMCA Safety Flash system depends on Members sharing information and so avoiding repeat incidents. Please consider adding safetyreports@imca-int.com to your internal distribution list for safety alerts or manually submitting information on incidents you consider may be relevant. All information is anonymised or sanitised, as appropriate.
IMCA’s store terms and conditions (https://www.imca-int.com/legal-notices/terms/) apply to all downloads from IMCA’s website, including this document.
IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.