Lost time injury (LTI): Hand cut during cutting operations
A member has reported an incident in which a welder badly cut his hand using a hand-held circular cutting tool. The incident occurred when a sub-contractor welder was cutting off an air vent in preparation for further welding work. Shortly after he started work, there was a loud shout and the chief mate rushed to him to find out that the welder has cut his palm all the way to his two fingers. First aid treatment was administered before he was taken to hospital for surgery. It was confirmed that two of his finger bones and veins were broken and cut off respectively.
Our member’s investigation noted the following:
- The welder had been through job hazard analysis (JHA) training on the morning of the day of the incident;
- The welder was rushing to finish the job;
- The welder replaced the blade in his cutting machine but was distracted and failed to fix back in place the blade protective guard.
Safety Event
Published: 4 September 2012
Download: 
IMCA SF 09/12
IMCA Safety Flashes
Submit a Report
IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of all. The effectiveness of the IMCA Safety Flash system depends on Members sharing information and so avoiding repeat incidents. Please consider adding [email protected] to your internal distribution list for safety alerts or manually submitting information on incidents you consider may be relevant. All information is anonymised or sanitised, as appropriate.
IMCA’s store terms and conditions (https://www.imca-int.com/legal-notices/terms/) apply to all downloads from IMCA’s website, including this document.
IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.