Skip to content

Lifeboat winch failure

A report of the UK’s Marine Accident Investigation Branch (MAIB) into the failure of a lifeboat winch on a cruise ship has concluded that the winch failed because the lubricating oil used for the freewheel sprag couplings was too viscous and did not match the type of oil specified by the manufacturer.

The incident occurred during a routine lifeboat drill. As one of the ship’s lifeboats was being recovered after the exercise, it lowered uncontrollably into the water, still attached to the fall wires. The ship’s electrical engineer sustained injury when, as a result of the incident, the winch hand crank handle, that had been left attached to the winch drive, hit him on the head when the winch started.

On investigation, the MAIB discovered that the inside surface of the outer face of the freewheel clutch had severe wear and scuffing with signs of overheating. The freewheel coupling and oil had been changed on the winch about four months before the incident.

The manufacturer reported that the davit winch failed because the oil used was too viscous, preventing the coupling locking mechanism from operating. Slipping of the coupling caused the oil to overheat. Lubricating properties would then be lost, causing a damage to running surfaces.

Safety Event

Published: 1 January 2000
Download: IMCA SF 01/00

IMCA Safety Flashes
Submit a Report

IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of all. The effectiveness of the IMCA Safety Flash system depends on Members sharing information and so avoiding repeat incidents. Please consider adding [email protected] to your internal distribution list for safety alerts or manually submitting information on incidents you consider may be relevant. All information is anonymised or sanitised, as appropriate.

IMCA’s store terms and conditions (https://www.imca-int.com/legal-notices/terms/) apply to all downloads from IMCA’s website, including this document.

IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.