Notice: Function _load_textdomain_just_in_time was called incorrectly. Translation loading for the the-events-calendar domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /home/storm/sites/dev-imca-int-com-1/public/wp-includes/functions.php on line 6114

Notice: Function _load_textdomain_just_in_time was called incorrectly. Translation loading for the broken-link-checker domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /home/storm/sites/dev-imca-int-com-1/public/wp-includes/functions.php on line 6114

Notice: Function _load_textdomain_just_in_time was called incorrectly. Translation loading for the woocommerce-eu-vat-number domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /home/storm/sites/dev-imca-int-com-1/public/wp-includes/functions.php on line 6114
Flash fire in gas supply equipment onboard dive support vessel - DEV imca
Skip to content

Flash fire in gas supply equipment onboard dive support vessel

A member has reported a small explosion on a vessel, resulting in a flash fire which caused minor burns to the hand of one crew member and slight damage to some equipment, including pipework and fittings.

A life-support supervisor (LSS) was in the process of decanting oxygen to increase the percentage of an 18% oxygen kelly to 20%. An oxygen line on deck was opened by the LSS to allow oxygen down into the main gas storage/mixing flat. The line to the kelly was opened and then the panel valve on the diaphragm compressor was opened. At no time was the diaphragm compressor pump running.

On opening the needle valve to decant oxygen into the bulk gas mixing panel, the LSS a loud crack followed by a flash. He immediately closed the oxygen inlet valve and extinguished the burning remains of a hose with some water from a receptacle near by.

However, oxygen was still escaping from the back of the panel. The LSS went on deck and closed the supply valve on the quad of oxygen. He returned to the main gas storage/mixing flat, via the saturation control room, to raise the alarm. Fire detectors had already picked up the fire and the alarms were raised.

The LSS sustained superficial minor burns to his arm and hand, plus singed hair.

Following investigation, a clear direct cause for the explosion/flash fire was not found. There were three equally likely possible causes:

  • a failing (crack) in a fitting or pipe, causing escape of oxygen and a flash fire from a fuel source external to the pipework;
  • rapid oxidisation and a flash fire from a fuel source internal to the pipework;
  • the valve being opened too quickly, causing friction/ignition within the pipework or a sudden increase in pressure on the pipework or fittings, leading to it rupturing and allowing oxygen to escape on to an external fuel source, either cause resulting in the flash fire.

The following remedial actions have been recommended:

  • The panel, valves and all other pipework on the diaphragm compressor were replaced;
  • video surveillance was installed in the main gas storage/mixing flat;
  • a specific line for oxygen was installed, direct from the oxygen quads to the main gas storage/mixing flat;
  • further non-destructive testing was conducted on parts of the diaphragm compressor to identify a failing in a fitting;
  • internal swab and laboratory testing was conducted to determine the fuel source of the fire;
  • signs were installed above all valves taps stating ‘open valve slowly to ease the pressure into the line’;
  • a regular and documented oxygen cleaning program was instituted.

Safety Event

Published: 21 November 2006
Download: IMCA SF 13/06

IMCA Safety Flashes
Submit a Report

IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of all. The effectiveness of the IMCA Safety Flash system depends on Members sharing information and so avoiding repeat incidents. Please consider adding safetyreports@imca-int.com to your internal distribution list for safety alerts or manually submitting information on incidents you consider may be relevant. All information is anonymised or sanitised, as appropriate.

IMCA’s store terms and conditions (https://www.imca-int.com/legal-notices/terms/) apply to all downloads from IMCA’s website, including this document.

IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.